Skip to main content
FREE Delivery!|(804) 885-2933

Staunton, Virginia ยท Free Delivery

Washed Sand for Patios in Staunton, VA

Free delivery to Staunton on every order, with loads arriving in as fast as 2 business days.

Delivering to Staunton, VA

Free delivery on every order.

  • Free delivery to Staunton
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Staunton

Crushed gravel and base materials that compact under tires.

21B

Stone-and-dust blend that packs hard under drives and patios

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Staunton

21A

3/4" minus blend compacted under roads and heavy-load areas

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Staunton

Rock & Stone delivered to Staunton

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Staunton

Decorative delivered to Staunton

Rounded stone for beds, borders and water features.

Sand delivered to Staunton

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Staunton

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Staunton works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Staunton.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Staunton addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Planning gravel and aggregate delivery in Staunton, VA means watching the calendar. Midwinter freezes and snow are the main hold-up, and soaked ground after a thaw can stall a truck. Virginia Rock Supply helps you time the drop and pick the right base. For a patio, that base starts with 21A.

Staunton sits in the Shenandoah Valley on limestone valley floor, where bedrock often sits close to the surface. That shallow rock changes how you prep a pad.

Materials for Staunton Projects

A Staunton paver patio stays level only as long as its bedding layer does. The surface pavers are the easy part. What holds them flat is a compacted base with the right sand on top.

Start with 21A. It is the standard Virginia driveway base. Spread it in lifts and compact each one. It carries the load so your pavers do not rock.

Finish the bed with screenings. Stone screenings, also called stone dust, give you a fine, level surface for paver and flagstone bedding. Screed them about an inch thick and set each paver into the bed.

Where the patio meets a wall or a step, add drainage. #8 crushed stone works for pipe bedding and porous backfill behind walls. It moves water instead of trapping it.

For the joint sand and any block work, use mason sand. It sweeps into paver joints and locks the surface tight. For a slab instead of pavers, washed sand beds and levels the base.

Ground and Conditions in Staunton

Thin base shows its failure fast here. The first sign is a low spot that holds water, then pavers that rock underfoot and joints that open. Under that is usually a base laid too thin or compacted in one lift.

The fix starts below the surface. Limestone ground takes water down into the rock rather than across it, so a patio that sheds water poorly can feed a sinkhole or undermine its own base. Build a base deep enough and compact it in lifts.

On ridge slopes, heavy rain and snowmelt run fast into narrow hollows and streams. That runoff scours banks and washes soil off shallow slopes. A patio cut into a slope needs a drainage layer and a place for the water to go.

Timing matters too. Cold winters bring regular freeze-thaw on the valley floor. Frost depth is set by each locality, and 24 inches in many valley counties is common. A base that meets that depth will not heave when spring arrives.

Delivery to Staunton and the Surrounding Area

Order online and choose your quantity by the ton or by the cubic yard. Tons work well when you know the weight your truck and site can take. Yards are easier when you are figuring volume from length, width and depth.

To estimate, multiply length by width by depth in feet, then divide by 27 for cubic yards. For 21A and other base material, a ton covers less volume than you might guess, since dense-graded mixes are heavy. The site calculator does this math for you.

Staunton is an independent city, not part of any county, and Virginia Rock Supply delivers bulk material to sites across the city. Place a bulk pile where a truck can reach it without blocking the street.

Questions from Staunton Buyers

What gravel is best for a driveway in Staunton?

21A is the standard choice. Top it with driveway gravel for a cleaner surface. On softer or wetter spots, some crews use 21B, the coarser, lower-fines base that drains a little better but packs less tightly.

How much material will my project need?

Measure the area and decide your depth first. Multiply length by width by depth in feet, then divide by 27 to get cubic yards. Base material is usually ordered by the ton, so heavy dense-graded mixes mean fewer yards per ton. Use the calculator on the site, or send your measurements and we will help.

Get Your Patio Base Sized Right

Run your patio dimensions through the calculator before you order. It converts your area and depth into tons or yards, so you buy what the job needs and not a pile of leftovers. When the numbers look right, place your order for delivery in Staunton.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Staunton, VA

What gravel is best for a driveway in Staunton?

21A is the standard choice. Top it with driveway gravel for a cleaner surface. On softer or wetter spots, some crews use 21B, the coarser, lower-fines base that drains a little better but packs less tightly.

How much material will my project need?

Measure the area and decide your depth first. Multiply length by width by depth in feet, then divide by 27 to get cubic yards. Base material is usually ordered by the ton, so heavy dense-graded mixes mean fewer yards per ton. Use the calculator on the site, or send your measurements and we will help.

What access does the truck need at my Staunton address?

A clear, level spot the truck can reach and tip in, with nothing parked in the way and no low branches or wires over the approach. If the drop is behind a gate, tell us the width when you order. Soft ground after rain is the usual reason a delivery in Staunton has to be moved, so point out anywhere the truck should not drive.