Washed Sand Delivery for Skippers, VA

What do you order when a lot in Skippers will not hold grade? For most jobs here, the answer starts with 21A. The ground tells you why. This is flat, low country built on old sea and river sediment, so water has nowhere to run.

That shapes every load. You build up before you finish, and you pick a base that packs hard instead of one that pumps when it gets wet.

Materials for Skippers Projects

Most projects here begin with fill, not with a pretty surface. Fill dirt raises a low pad or levels a yard before anything structural goes down. Order it first, compact it in lifts, then cap it with 21A.

21A is the standard Virginia driveway base. It carries enough fines to lock up tight under a drive, a parking pad, or a shed floor, and it is what you want under pavers once the sub-base is right.

Where a pad sits wet, 21B is the alternative. It is the coarser, so it drains a little better but packs less tightly than 21A.

Above the base, the finish depends on the job. Drainage stone, sand, and soil round out most orders.

For a patio, the usual stack is fill to grade, 21A compacted, then screenings or washed sand for the bedding course. For a drain, skip the fines and go straight to #57 stone or drain rock so water moves instead of sitting.

Lawns and beds sit on top soil over this sandy ground, and beds hold moisture better under shredded mulch through the humid summers.

Ground and Conditions in Skippers

The ground here is layers of sand, silt and clay laid down as old sea and river sediment, not weathered rock. That means no two spots behave the same. Sandy patches drain fast and need water held; clayey and swampy low ground stays wet and needs a base built high enough to stay out of it.

Flat, low ground gives water nowhere to run. Heavy rain from tropical storms, nor'easters and summer thunderstorms ponds on drives and pads, and near the tidal rivers high water adds to it.

An under-built base fails here for one reason: it sits in water. Compact fill in lifts, keep the 21A crown above the surrounding grade, and put a drainage layer where the pad cannot shed. Freeze-thaw is lighter here than inland, so winter work runs, but long wet spells and the late-summer storm season are what hold jobs up.

Delivery to Skippers and the Surrounding Area

Order online and pick your quantity by the ton or the yard. Measure the area, decide the depth, and the site converts it to the tonnage you need. A driveway base needs a thick compacted layer, while a bedding course is much thinner.

Bulk delivery to a site in Skippers means the truck needs a clear path and a spot to dump. Tell us where the pile goes before the load arrives, because once it is down, it stays down.

We deliver across Greensville County, including Jarratt, and to job sites throughout the region.

Questions Skippers Buyers Ask

What is the best base under pavers in Skippers?

Compacted 21A, built up in lifts and crowned so it sheds water. On wet, low ground, start with fill dirt to raise grade, then cap it with 21A. Finish with screenings or washed sand for the bedding course.

Do you supply contractors working in Skippers?

Yes. Contractors, builders and homeowners all order the same way, online, with material sized by the ton and delivered to the site. Base, drainage stone, sand and soil can go on one order, which saves a trip. Give us the pad location and the access, and we will place the load where your crew needs it.

Order 21A and Bulk Fill in Skippers

Start with the base. For most Skippers jobs that means 21A over compacted fill, with #57 stone where water needs to move. Order online, size the load to your project, and Virginia Rock Supply will deliver it to your site in Greensville County.