Mason Sand for Patios in Oakwood, VA

Virginia Rock Supply stocks gravel and aggregate delivery in Oakwood, VA, from 21A base to mason sand and #57 stone. The ground here is thin and rocky over flat-lying rock and old coal ground, so the layers under a patio matter more than the pavers on top. Order the bedding and base together and you build it once.

Materials for Oakwood Projects

A paver patio starts with a compacted base and ends with a bedding layer, and both matter more than the pavers. For the base, 21A is the call. Set it in lifts and compact each one. For the bedding over that base, use Mason Sand, laid about an inch thick and screeded flat. It beds brick, block and pavers, and it fills the joints when you sweep and wet them.

Some builds want a coarser, lower-fines base instead. 21B drains a little better than 21A but packs less tightly, so it suits a patio only where water needs a path out. Under flagstone or tight flatwork, Screenings do the same bedding job as sand at a finer grade. For the drainage layer behind a retaining wall or in a French drain, use Drain Rock or #57 Stone. Round out the order with Washed Sand for leveling under a slab.

Ground and Conditions in Oakwood

Thin, rocky soil over fractured rock and coal ground is the story on these slopes. A shallow base fails fast here: it pumps, shifts and ruts after one wet season, and the pavers follow. The fix is depth. Dig out the soft ground, bring in 21A and compact it in lifts until it rings hard under the plate.

Steep ground sends heavy rain into the hollows fast, so plan drainage before you set a single paver. Pitch the patio away from the house, and set a drainage layer of #57 stone or Drain Rock behind any wall. On a cut or fill slope, protect bare ground before a storm reaches it, because washes and slides start on disturbed ground first.

Winter is the other constraint. Snow and ice on steep grades stop work more than anything else, and freeze-thaw is harsher on the ridgetops than in the valley bottoms. Frost depth is set by each county or city, so check locally before you set footing depth. Build in the dry stretch and the base lasts.

Delivery to Oakwood and the Surrounding Area

Order online and pick your quantity by the ton or by the cubic yard. Most buyers here work in tons, so weigh the area you are covering against the depth you need. A thick patio base takes far more 21A than the thin bedding sand on top of it, and guessing low means an extra load and a stalled job.

The calculator on each product page does that math for you. Enter your length, width and depth and it returns the tonnage, so you can size a load before you order. Bulk delivery drops where the truck can reach, so tell us about a steep drive or a narrow hollow entrance when you order. We deliver across Buchanan County, including Grundy, Vansant, Big Rock, Davenport and Hurley.

Questions Oakwood Buyers Ask

What gravel is best for a driveway in Oakwood?

21A is the standard Virginia driveway base, and it is what most drives here are built on. Crown it, compact it in lifts, and top it with Driveway Gravel or #57 stone for a cleaner surface. On a steep drive, keep the crown and a drainage path so runoff does not cut the surface.

How much material will my project need?

Measure the area and multiply by the depth you want, then convert to tons. A patio base is typically a thick course of 21A with a thin layer of mason sand on top. The calculator on each product page handles the conversion for you. Order a little over the estimate, since compaction pulls the base down and a short load costs you a second delivery.

Size Your Patio Load Before You Order

Run your patio dimensions through the calculator on each product page and it returns the tonnage you need, base, bedding and drainage together. Then place the order and let us deliver the 21A, mason sand and #57 stone to your Oakwood site, sized to the job you are actually building.