3/4 Inch Crushed Stone Delivery for Midlothian, VA

Figure the tonnage before you figure the material. For gravel and aggregate delivery in Midlothian, VA, that means measuring length, width and compacted depth, then letting Virginia Rock Supply price the load. On this ground, most jobs start with 21A as the base and build up from there.

Midlothian sits on heavy red clay that drains slowly, so the base has to carry the load. Get the quantity right and the base right, and the rest of the job goes quickly.

Materials for Midlothian Projects

Most work here starts below grade. Pads get raised with fill dirt before anything structural goes down, and driveways and parking areas get a compacted layer of 21A on top of that. If you are building a pad for a shed, a garage or an equipment stand, that order matters.

For the base layer, 21A is the standard Virginia driveway base. Where you want a coarser mix that drains a little better but packs less tightly, order 21B instead. Both go down over a raised, compacted subgrade, not over bare clay.

Above the base, the choice depends on the project:

• Fill Dirt for bulk fill, raising grade and building up a pad before the 21A goes down.
• 21A for driveways, parking pads, shed and patio bases.
• 21B for base under drives and pads where a coarser, lower-fines mix is wanted.
• Driveway Gravel for surfacing an existing drive or topping a compacted 21A base.
• Screenings for paver and flagstone bedding, path surfacing and fine leveling under flatwork.

Drainage work is the other half of the list. A French drain, a downspout run or a drywell needs washed stone that lets water move, so use #57 Stone or Drain Rock rather than a dense-graded base. Behind a wall, #8 Crushed Stone works as porous backfill.

Ground and Conditions in Midlothian

The Piedmont ground under Midlothian is heavy clay subsoil, often red, weathered in place over a thick layer of soft, decayed rock called saprolite. It drains slowly, so the base has to carry the load rather than letting water pass through. Build the base deep enough and compact it in lifts, or the surface will move.

Runoff is the real problem. Slow-draining clay sheds water quickly in summer thunderstorms and in the heavy rain that tropical system remnants bring, so puddling on clay and surface runoff show up fast. Bare Piedmont clay also erodes easily, which is why cleared slopes, building sites and ditches lose soil in a heavy rain and stream banks scour after storms.

Plan the working season around moisture. Saturated clay after long wet spells is the usual hold-up, and midwinter freezes pause work for shorter spells than in the mountains. Winter nights often freeze and days thaw, so a gravel drive sees repeated freeze-thaw, though less than in Northern Virginia or the mountains. Frost depth is set by each county or city, so check the local requirement before you set footing depth.

Delivery to Midlothian and the Surrounding Area

Order online and pick your quantity by the ton or by the yard. Measure the area and the compacted depth you need, and the site will convert that into a load weight. If you are unsure, measure again and let the calculator size the load.

Bulk delivery drops the material where the truck can reach, so tell us about soft ground, low branches or a narrow entrance before the load rolls. We deliver across Midlothian and the rest of Chesterfield County, including Chester and Chesterfield.

Order 21A and Fill for Your Midlothian Job

For most Midlothian work the load starts with 21A over compacted fill dirt, with washed stone wherever water has to move. Measure the area, set your depth, and order by the ton or yard. Place your order online and we will deliver the material to your site in Midlothian.