Bulk Gravel Delivery to Jenkins Bridge, VA

If you are planning a patio, a parking pad or a new driveway, you need gravel and aggregate delivery in Jenkins Bridge, VA, and the material under the surface matters as much as the material on top. Virginia Rock Supply stocks 21A. On the flat, low ground around here, a base that does not lock up will let water sit and your flatwork move.

Materials for Jenkins Bridge Projects

A paver patio or a concrete slab is only as good as its bedding. Get that layer wrong and the surface rocks, dips and holds water within a season. Here is what we send out for this work.

Start with 21A for the structural base under a patio or pad. It is the standard Virginia driveway base, and it compacts tight enough to carry the load without pumping. Build it in lifts and compact each one.

Over the compacted 21A, set your pavers in screenings. Stone screenings, also called stone dust, give you a fine, level bed that locks the paver edges and drains. For flagstone and tighter joints, mason sand does the same job with a smoother finish.

Where water needs to move under or beside the flatwork, use #8 crushed stone. This fine washed stone is the one for pipe bedding, paver joints and porous backfill behind a retaining wall. #57 stone handles the heavier drainage work at about 3/4 inch.

Ground and Conditions in Jenkins Bridge

The ground here is old sea and river sediment, layers of sand, silt and clay on flat, low land. It is not weathered rock, and it does not behave like it. Sandy spots shed water fast. Clayey and marshy low ground holds it.

That is why a thin base fails here. Water ponds on a drive or pad, works into the subgrade, and the surface settles in low spots. Excavate deep enough, put down the 21A in lifts, and compact each lift before the next one goes on.

Flat ground gives water nowhere to run, so tropical storms, nor'easters and summer thunderstorms all leave standing water. Plan a drainage layer of #57 stone or drain rock, and pitch the finished surface away from the structure.

Freezes are short, so winter work runs most years. Long wet spells and the late summer to fall storm season are what hold jobs up, especially on low lots.

Delivery to Jenkins Bridge and the Surrounding Area

Order online and pick your material. The next question is quantity, and that means choosing between tons and cubic yards. Stone and sand are usually sold by the ton, while soil, fill and mulch are easier to think about by the yard.

To estimate, work out the square footage, multiply by the depth in feet, then divide by 27 for cubic yards. For a solid patio base, that figure tells you how much 21A to bring in, or the calculator can work it out for you.

We deliver bulk loads across Jenkins Bridge and the rest of Accomack County, including Onancock, Accomac, Parksley, Onley and Belle Haven. Have the drop spot clear and reachable so the load lands where you want it.

Questions About Gravel in Jenkins Bridge

What gravel is best for a driveway in Jenkins Bridge?

21A is the answer for most drives here. Top it with driveway gravel or #57 stone if you want a cleaner surface. Where you want a coarser, lower-fines mix that drains a bit better, 21B is the other choice.

How much material will my project need?

Measure the area and the depth you want, then convert. Multiply square feet by depth in feet and divide by 27 to get cubic yards. A patio base of 21A adds up quickly, so run your own measurements before you settle on a number. Add a little for compaction and grade variation, and use our calculator to confirm the figure before you order.

Get Your Base Right the First Time

Run your numbers through the quantity calculator, then order 21A, screenings and drainage stone for your Jenkins Bridge project. Virginia Rock Supply delivers bulk material across Accomack County, sized to the job. Place your order online and we will get it to your site.