3/8 Inch Crushed Stone for Patios in Clarksville, VA

Virginia Rock Supply stocks gravel and aggregate delivery in Clarksville, VA, from 21A base to decorative stone. Patio and flatwork projects here start with the right bedding, and we carry the sizes that fit. You can order by the ton and have it dropped at your site in Mecklenburg County.

Materials for Clarksville Projects

Under pavers and flatwork, the bedding layer does the quiet work. Set your pavers on Screenings for a fine, level bed that locks tight and drains at the joint. For pipe bedding and tight drainage under a patio edge, #8 Crushed Stone is the size that fits.

Build the patio base from the ground up. 21A is the standard Virginia driveway base, and it works under patios too. Where you want a coarser mix that drains a little better, use 21B.

For the surface and surrounding work, 3/8" Crushed Stone gives you a finer clean stone for topping and pipe bedding. Washed Sand levels and beds under slabs, and Mason Sand fills paver joints and sets brick and block.

Ground and Conditions in Clarksville

The Piedmont subsoil under Clarksville is heavy clay, often red, weathered in place over soft decayed rock. It drains slowly, so the base has to carry the load. A thin base over that clay shows the failure fast: ruts, rocking pavers, and low spots after the first wet season.

Adding surface stone only hides the problem on this clay. Dig out the clay, build the 21A base in lifts, and compact each one before the next. Add a clean stone drainage layer where water sits. Slow-draining clay sheds water fast in summer thunderstorms and tropical system remnants, so runoff and puddling are the main problem.

Piedmont clay also erodes easily once it is bare, so building sites, cleared slopes and ditches lose soil in heavy rain. Cover bare ground and line ditches with RipRap where flow is strong. Saturated clay after long wet spells is the usual hold-up, and midwinter freezes pause work for shorter spells than in the mountains.

Delivery to Clarksville and the Surrounding Area

Decide whether you want tons or yards before you order. Bulk stone and sand are sold by weight, and the ton figure tells you what the truck carries. If you measured your patio in cubic yards, convert to tons using the material's density, or ask us and we will do the math with you.

Estimate your quantity from area and depth. A compacted patio base over a square pad takes far more material than the thin bedding layer on top of it. Order the base first and the bedding last, so the fines do not get buried under the wrong pile.

We deliver bulk material to Clarksville and across Mecklenburg County, including South Hill, Chase City, Bracey, La Crosse and Boydton. Place your order online and the load comes sized to your project, ready to spread.

Order Your Patio Material in Clarksville

Run your patio numbers through our calculator first, then order the 21A base, screenings and 3/8 inch stone your project needs. Virginia Rock Supply delivers bulk aggregate across Clarksville and Mecklenburg County by the ton. Measure your area and depth, run the calculator, and place your order online.