Skip to main content
FREE Delivery!|(804) 885-2933
Order 21A and Crushed Stone in Pulaski County, VA

Order 21A and Crushed Stone in Pulaski County, VA

Order gravel, stone and aggregate delivery in Pulaski County, VA online. Buy by the ton or the yard and pick your delivery window. Virginia Rock Supply hauls 21A, washed stone, sand, topsoil and fill across the New River Valley.

21A is the Virginia driveway base. It packs hard and holds up under tires. Order it for drives, parking pads and shed bases, or start with Fill Dirt if your grade sits low.

Materials Delivered in Pulaski County

Start with 21A. It is the standard dense-graded base here. Type I is crushed material only. Type II allows crushed or uncrushed. The fines make it pack tight, so it works as a base under drives, pads and patios.

Step up to 21B when you want a coarser mix that drains a little better. It packs less tightly than 21A. Use it under drives and pads where water needs an easier path out. Both come out of the same dense-graded family, so the choice is about drainage versus lock-up.

Round out a load with Washed Sand for bedding, Mason Sand for block work and Garden Soil for raised beds. Add Shredded Mulch for beds and tree rings.

Ground Conditions Across Pulaski County

Thin base is the failure you see here. A drive laid on too little 21A ruts, pumps and loses its crown after a wet season. The fix is depth: build the base up, compact it in lifts, then surface it.

Pulaski County sits in the Valley and Ridge ground zone. Limestone and dolostone valley floors carry karst, where sinkholes and caves occur and bedrock often sits close to the surface. Long ridges of folded sedimentary rock rise between the valleys with thinner, rockier soil.

Water behaves differently on each. In limestone ground much of it goes down into the rock rather than across it, so concentrated runoff can open or enlarge a sinkhole. On ridge slopes, heavy rain and snowmelt run fast into narrow hollows and streams.

That shapes material choice. Use a washed drainage layer where water needs to move down and away, and armor slopes and ditch outlets against fast runoff. Heavy rain scours stream banks and washes soil off steep, shallow-soiled ridge slopes.

Plan around the season. Midwinter freezes and snow are the main hold-up, along with soaked ground after thaws and heavy rain. Frost depth is set by each county or city, so check your own locality before you dig footings.

Delivery Across Pulaski County

First decision: tons or yards. Order by the ton when weight is what matters, such as base stone and ballast. Order by the yard for sand, soil and mulch, where volume is easier to picture.

Estimate before you buy. Multiply length by width by depth in feet, then divide by 27 for cubic yards. Enter your own area and depth in the calculator rather than guessing at yards by eye.

Bulk delivery drops in one pile at the closest point the truck can reach. Point out the spot when you order. We cover Pulaski, Dublin, Draper, Hiwassee and the surrounding county roads.

Choosing the Right Material

Neighbours sit on similar ground, so the right material shifts only a little. Wythe County shares the Valley and Ridge zone. Same limestone valley floors, same karst, same base and drainage logic. Compare typical projects there instead of swapping materials.

Floyd County sits on the Blue Ridge Plateau, next door in the New River Valley but on different ground. Shallow, rocky soil over old, hard igneous and metamorphic rock, without the limestone karst of the valleys to the west. Expect more rock and less deep digging, so base thickness matters more.

Carroll County spans two zones, the Blue Ridge Plateau and the Central and Southside Piedmont, in Southwest Virginia. Piedmont ground is a different story from the karst valleys here, so base and drainage choices change with the site.

Size Your Load, Then Place the Order

Run the numbers first: area, depth, then tons or yards. The calculator on the product pages does the math for you. Pick your material, set the quantity and place the order online for delivery anywhere in Pulaski County.

Towns we deliver to in Pulaski County

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Pulaski County

Should I order material by the ton or by the yard?

Order by the ton for stone, base and ballast, where weight drives the load. Order by the yard for sand, topsoil and mulch, where volume is easier to estimate. Both units appear on the product pages, so pick the one that matches your project notes.

Which stone is best for drainage in Pulaski County?

Use washed stone. #57 Stone handles French drains, downspouts and driveway topping, and #8 Crushed Stone works for fine drainage, pipe bedding and paver joints. In limestone ground, where water sinks rather than spreads, a clean washed layer keeps that path open.

What do I need to have ready for a bulk delivery?

Pick a drop spot the truck can reach and mark anything it could hit. Clear the area before the driver arrives. Tell us the access width and any overhead lines when you order, then have your base area ready to receive the pile.